Anti-lalata Aluminum Rebar bututu
| Wurin Asalin: | Shandong, China |
| Sunan Alama: | LIKE |
| Lambar Samfura: | 6060 6063 6082 6061 |
| Aikace-aikace: | Masana'antu |
| Maganin Sama: | Mill Gama |
| Alloy Ko A'a: | Alloy |
| Al (Min): | 90-99.9 |
| Haɓaka (≥ MPa): | 275 |
| Sunan samfur: | Aluminum Hollow Bar |
| Abu: | Aluminum Round Rod |
| Diamita: | 5-500 mm |
| Tsawon: | 0-6000 mm |
| Tsawon farashi: | CIF CFR FOB Ex-Aiki |
| Launi: | Azurfa |
| Haushi: | H112, O, F, T4, T5, T6, T62 |
| Ƙarfin Ƙarfi (≥ MPa): | 310 |
| Sabis ɗin sarrafawa: | Yanke |
| Haƙuri: | ± 0.1mm |
| Siffar: | Zagaye |
| Tauri: | 99-200 |
| Daraja: | 6000 Series |
| Dabaru: | Extruded |
| Port: | Tianjin, Shanghai, Qingdao da dai sauransu |
| Girman: | Musamman |
| saman: | Mill Gama |
| Nau'in: | sanda madaidaici |
| Daidaito: | ASTM AISI JIS DIN GB |
| Kayan Injiniya | ||||||||
| ALUMINUM | Daraja | Na al'ada | Haushi | Ƙarfin Ƙarfi | Ƙarfin Haɓaka | Tsawaita% | Brinell Hardness | |
| Plate | Bar | |||||||
| 1XXX | 1050 | O,H112,H | O | 78 | 34 | 40 | - | 20 |
| 1060 | O,H112,H | O | 70 | 30 | 43 | - | 19 | |
| Al-ku | 2019 | O,T3,T4,T6,T8 | T851 | 450 | 350 | 10 | - | - |
| 2024 | O,T4 | T4 | 470 | 325 | 20 | 17 | 120 | |
| Al-Mn | 3003 | O,H112,H | O | 110 | 40 | 30 | 37 | 28 |
| 3004 | O,H112,H | O | 180 | 70 | 20 | 22 | 45 | |
| Al-Si (4XXX) | 4032 | O,T6,T62 | T6 | 380 | 315 | - | 9 | 120 |
| Al-Mg | 5052 | O,H112,H | H34 | 260 | 215 | 10 | 12 | 68 |
| 5083 | O,H112,H | O | 290 | 145 | - | 20 | - | |
| Al-Mg-Si | 6061 | O,T4,T6,T8 | T6 | 310 | 275 | 12 | 15 | 95 |
| 6063 | O,T1,T5,T6,T8 | T5 | 185 | 145 | 12 | - | 60 | |
| Al-Zn-Mg | 7003 | T5 | T5 | 315 | 255 | 15 | - | 85 |
| 7075 | O,T6 | T6 | 570 | 505 | 11 | 9 | 150 | |
Standard: GB, JIS, ASTM, DIN, EN, AISI
Wurin Asalin: Shandong, China
Marka: LIKE
Lokacin bayarwa: kwanaki 7-15
Ƙarewar saman: 2B, 2D, No. 1, No. 4, BA, HL, 6K, 8K, polishing, annealing, pickling, mai haske, da dai sauransu.
Takaddun shaida: ISO9001
Yawan aiki: ton 20,000 / shekara
MOQ: 1 ton
Biya: 30%TT+70%TT/LC
Biya: T/T, L/C, Western Union
Gwaje-gwaje: Gwajin squash, gwajin tsawo, gwajin hydrostatic, gwajin lalata crystal, juriya na zafi
Aikace-aikacen da ake amfani da su don kera kayan ado, kamar su aluminium veneers, aluminum composite panels, perforated panels, da tsabta faranti, da dai sauransu:
1) Aikace-aikace na waje: rufin bango, facades, rufin rufi da canopies, tunnels, murfin shafi ko gyare-gyare.
2) Aikace-aikacen cikin gida: rufin bango, rufi, bandakuna, kicin da baranda
3) Talla da aikace-aikacen kasuwa: allon nunin dandamali, fastoci da gaban kantuna
4) sufuri da aikace-aikacen masana'antu
1).Babban Ingantaccen Gudanarwa
a.Office Automation tsarin
b.Gudanar da aikin
c.Ma'ajiyar bayanai don tallafawa auna aikin
d.Daidaitaccen aiwatar da ScoreCard
2).Sabis Tasha Daya
a.Daga ra'ayi zuwa ƙirar samfurin ƙarshe
b.Gudanar da aikin
c.sabis na kan layi
d.Taimakon dabaru
Tambaya: Yadda za a tattara samfuran?
A: Daidaitaccen marufi mai dacewa da fitar da teku, Layer na ciki yana da takarda mai hana ruwa ruwa tare da marufi na baƙin ƙarfe kuma an gyara shi tare da pallet ɗin katako na fumigation.Yana iya kare samfuran yadda ya kamata daga lalata da sauye-sauyen yanayi daban-daban yayin jigilar teku.
Tambaya: Menene game da bayanin farashin samfur?
A: Farashi daban-daban bisa ga canje-canjen farashin kayan aiki na lokaci-lokaci.
Tambaya: Menene sharuɗɗan biyan ku?
A: Biya <= 1000USD, 100% a gaba.Biyan kuɗi> = 1000USD, 30% T / T a gaba, ma'auni kafin jigilar kaya ko dangane da kwafin BL ko LC a gani.
Tambaya: Kuna bayar da sabis na Samfuran da aka ƙera?
A: Ee, idan kuna da ƙirar ku, za mu iya samarwa bisa ga ƙayyadaddun ku da zane.
